High-penetration, water and oil repellent protection with enhanced color “wet” look for natural stones and concrete in internal and external areas. It has great resistance to UV radiation and protects against moisture and oily pollutants without creating a surface film. Suitable for surfaces such as interior and exterior walls that have been covered with PLANOCOLOR ANTICO and PLANOCOLOR KURASANI ADDITIVE microcement coatings, floor and wall stone coverings, decorative micro-pebble or polished terrazzo coverings that have been produced with NOVACEM CREATIVE or NOVACEM CREATIVE FLOOR hydraulic binders. It is spread undiluted by brush in 1 or 2 layers, depending on the type of application, taking care not to leave excess material on the treated surface. On PLANOCOLOR TERRAZZO micro-pebble coverings and highly absorbent surfaces it is recommended to apply one layer of PROTECT 300 S prior to its application.
• WET PLUS S can be used as stain-proofing and color-enhancing agent for:
o polished and unpolished natural stones such as granites, marbles, shale, limestone and sandstone
o rustic or textured finishes such as NOVACEM CREATIVE or NOVACEM CREATIVE FLOOR, concrete of any type, masonry coatings
o bricks, coloured cement tiles and cement boards
o indoors and outdoors such as floors, kitchen and bathroom benches, tables, etc.
o interior and exterior walls covered by PLANOCOLOR ANTICO and PLANOCOLOR KURASANI ADDITIVE
• Form: liquid
• Density: 0,91 ± 0,05 kg/L
• Application temperature: from +10°C up to +30°C
Application:
The application surface should be dry and clean, free from dust, oil, grease, cement laitance and loose parts. WET PLUS S is applied with a brush isomer in one or two continuous layers. The second layer is applied after 5-8 hours. An extra layer gives a glossy look. Excess material is directly removed from the surface with a dry cloth or white pad.
Surfaces that have been waterproofed with the WET PLUS S should be protected for at least 5 hours from rain and high temperatures. Walkability after 8 hours.
Recommendations:
• Avoid using direct exposure to sunlight and / or strong wind as well as rain
• Do not add water or other liquids
• Do not apply it to substrate and ambient temperatures lower than +10°C and higher than +30°C
• Do not apply on wet surfaces
• On highly absorbent surfaces it is recommended to apply one layer of PROTECT 300 S
Legal Notice:
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.
Back