Solvent based acrylic varnish for natural stones, terrazzo, microcement coatings, stamped concrete floors and concrete, in indoor and outdoor areas. It protects against oily and colored stains, providing satin-glossy appearance, without altering the color of the final coating or covering. It is applied in 2 or 3 layers, depending on the absorbance of the coating (2nd layer must be applied within 24 hours).
• PLANOFINISH AC-S stain protector can be used as stain-proofing agent for:
o unpolished natural stones such as granites, marbles, shale, limestone and sandstone
o microcement such as PLANOCOLOR PREMIUM, PLANOCOLOR ANTICO, concrete of any type, masonry coatings
o bricks, colored cement tiles and cement boards
o indoors and outdoors such as floors, kitchen and bathroom benches, tables, etc.
• Form: liquid
• Density: 0,94 ± 0,05 kg/L
• Drying: ≈ 30 minutes
• Application temperature: from +10°C up to +30°C
Application:
The application surface should be dry and clean, free from dust, oil, grease, cement laitance and loose parts. PLANOFINISH AC-S is applied with a brush, roller or spraying isomer in 2-3 continuous layers. The next layer is applied after it has been absorbed and dried the previous one in about 30 minutes. Surfaces that have been waterproofed with the PLANOFINISH AC-S should be protected for at least 5 hours from rain and high temperatures.
Recommendations:
• Avoid using direct exposure to sunlight and/or strong wind as well as rain
• Do not add water or other liquids
• Do not apply it to a substrate and ambient temperatures lower than +10°C and higher than +30°C
• Do not apply on wet surfaces
• Residues on non-absorbent surfaces should be removed immediately, possibly using a solvent
Legal Notice:
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.
Back