Saturday - Thursday 9:00 -17:00

PLANOEASY GRIP

PLANOEASY GRIP is applied as a thickening and thixotropic agent in bonding systems especially in epoxy and polyurethane binding resins. In this way it facilitates the laying of quartz resin systems on vertical surfaces, without altering and reducing the bonding properties of the resins.

• For the creation of a high adhesion primer, PLANOEASY GRIP special additive for quartz resin systems can be used in combination with:

o one component polyurethane resins such as PLANOCOLOR PU

o epoxy resins such as PLANOCOLOR LIQUID GLASS

• Consistency: powder

• Specific gravity: approx. 0,05 kg/L

Application:

For the creation of the adhesive primer, it is mixed with the resin at a ratio of 5% by weight of the binder resin. Mix at low speed until the material is evenly distributed. The adhesive primer should be applied evenly on the vertical surface and then, on the still fresh surface the quartz resin mixture should be placed.

Recommendations:

• Use with other binder resins only after testing

• Do not apply to water systems

• Do not apply when temperature of the substrate and environment is lower than +5°C and higher than +35°C

• Application must be done by professional applicators

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.