One component, solvent based polyurethane binder resin which is mixed with S, MQ, MR natural uncoated, LC lightweight coated in the mass and RC GLASS recycled glass granulates in order to create decorative quartz flooring (‘stone carpet’) of high strength indoors and outdoors. It is used on terraces, external paving in hotels, public areas, balconies, swimming pools, fountains. Suitable also for creating coatings of small thickness over cement based or polyurethane waterproofing systems. For wall applications and skirting, create a suitable bonding bridge by priming the substrate with PLANOEASY GRIP and PLANOCOLOR PU (after apply ‘wet on wet’). For easier application, it is recommended to add PLANOEASY FINISH to the mix. Mixing ratio: PLANOCOLOR PU / PLANOEASY FINISH 10% by weight. Mixing ratio: PLANOCOLOR PU / PLANOEASY GRIP 5% by weight.
• PLANOCOLOR PU solvent-based polyurethane binder resin can be used in combination with PLANOCOLOR GRANULATES for:
o outdoor areas such as terraces, porches, surrounding pool areas, staircases, etc.
o pools, baths, and surfaces with permanent presence of water
o domestic or business places
o new or renovated structures
o special structures, furniture, benches, etc.
• Form: liquid
• Chemical substance: Polyurethane
• Density: 1.0 ± 0.05 kg/L
Substrate preparation:
The surfaces will have to be clean, rid of dust, dirt, oils, grease, rust and generally from particles that can negatively affect the adhesion of the substance. For outdoor applications, the underlay needs to be waterproofed with SC ELASTIC or SC 200 PENETRATE beforehand.
Preparation of the mix:
In a clean container that contains 1L of PLANOCOLOR PU add, while mixing in low speed, 8-10Kg PLANOCOLOR GRANULATES until a uniform paste is achieved. The consistency of the aggregates depends on their granulometry. Aggregates of the same mass with smaller granulometry demand more quantity of PLANOCOLOR PU. In any case, ensure the complete saturation of the aggregates.
Application:
The application of the mixture is done with a rounded, metal spatula. Apply the mixture throughout the surface in an even layer, while ensuring that there are no gaps or protrusions. For easier gritting it is advised to add to the mix the special non-stick adjuvant PLANOEASY FINISH at a rate of 10% by weight of the total amount of binder resin.
For applications of the mixture to vertical surfaces a layer of the bonding primer PLANOCOLOR PU/PLANOEASY GRIP needs to be applied beforehand. For more information refer to the technical characteristic sheets of the products.
Recommendations:
Do not apply:
• When the temperatures of the substrate and the environment are lower than +5°C or higher than +35°C
• When the relative humidity in the application area is higher than 65%
• When the substrates have a moisture content of more than 4%
• The permanent submersion in water, for examples in pools or fountains, should be done 7-10 days after the application is complete
• The application is recommended to be done by a professional user
Cleaning:
Tools, buckets can be cleaned with NOVATHINNER PU as long as the mixture is still fresh. After hardening occurs, cleaning can take place by mechanical means.
Legal Notice:
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.
Back