Transparent water dispersion liquid that can be applied even undiluted in order to clean difficult stains from tiles, mineral surfaces as well as PLANOCOLOR PREMIUM microcement coatings. Its special composition does not change the color of the joints and does not corrode the shower, bath and kitchen accessories. It is suitable for cleaning and removing difficult stains such as: salts, puddles and soaps, cement and rust traces, coffee, wine and colored non-oily stains. Sensitive surfaces such as microcement coatings as well as polished surfaces, should be tested on the least visible portion of the area prior to full scale application.
• High-performance detergent for difficult stains HARD REMOVER is suitable for:
o cleaning and removing difficult stains such as:
o
o
o salts, puddles and soaps
o cement and rust traces
o coffee, wine and colored non-oily stains
o surfaces such as:
o
o
o ceramic and gres porcelain tiles
o mineral, acid resistant coverings
o PLANOCOLOR MICROCEMENT decorative coatings
o application in:
o
o
o houses
o public areas such as restaurants, hotels, hospitals
o industrial areas and office buildings
• Form: liquid
• Density: 1,05 ± 0,05 kg/L
• pH: 1,5 ± 0,5
Application:
Apply HARD REMOVER insoluble or slightly diluted with water, depending on the kind of surface and dirt, using a sponge, brush or roller and let the product act for 3-5 minutes. Then rub lightly with a brush or sponge. At the end of the process, in all cases, carefully rinse the surface with plenty of water. In highly persistent or deeply impregnated stains, repeat the procedure. When applied to polished surfaces, it is recommended to prepare a test area in a small, not visible part of the surface.
Recommendations:
Do not apply:
• On acid sensitive surfaces
• On polished surfaces without preparing a test area
• On any type of covering in order to remove oily stains
• On any surface before consulting the safe use instructions on the label before using
• Keep out of reach of children
Legal Notice:
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.
Back