All-purpose detergent in gel form ideal for cleaning graffiti from walls. It is also used in order to remove synthetic stains such as polyurethane or epoxy adhesives, paints or varnishes, residues of epoxy grout or gasoline. It is suitable for removing any type of paint, graffiti, inks, acrylic varnishes, even waxes, as well as for degreasing metals. It is applied on smooth or mineral coatings, facilitating cleaning without damaging them. It removes almost any type of paint, without affecting aluminum. It must not come into direct or indirect contact with acrylics and polyethylene as well as with synthetic surfaces such as rubber, polystyrene, vinyl flooring, synthetic fabrics and fiberglass. Do not use on wooden surfaces without testing.
• Purpose paint remover CLEANCOLL SP can be applied to facilitate stain removal in the following cases:
o remove any type of paint, graffiti, etc.
o enamel varnish and plastic coatings
o residues of contact adhesive
o epoxy and polyurethane dyes
o lacquers, shellac, tar and many other coatings
o residues of glue and epoxy grouts created during welding and grouting of ceramic tiles
• Form: gel
• Density: 0,98 ± 0,05 kg/L
• Application temperature: from +5°C up to +35°C
Application:
Before applying CLEANCOLL SP, protect any surface that may be damaged when in contact with solvents. Apply CLEANCOLL SP as it is without thinning uniformly to a thick layer with a brush partially on surfaces of up to 0.5 m² at a time. When the coating has been softened (5 - 10 minutes) with a soft brush or cloth lightly rubbing the surface, remove the residue. At difficult points, repeat the process if necessary. Finally rinse the surface with cold water and detergent.
Recommendations:
Do not apply:
• Rubber, polystyrene, vinyl flooring, etc.
• It is not compatible with synthetic fabrics and fiberglass
• Do not use it in good quality wood without testing
• Avoid using in cases where the substrate and environment temperature less than +5°C or higher than +35°C
• Use only in a well-ventilated area
• Do not use it with hot air guns or near an open flame or other ignition source
• Keep out of reach of children
Legal Notice:
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.
Back